Pellets
Pellet Stove Motor Fan Installation
You may have just received a replacement motor from us for your Pellet Stove and are wondering why it looks so different and maybe thinking you have the wrong item. Don’t worry. You may very well have everything you need after you read this. The Motor Doesn’t Look The Same… The original motor that came […]
Should I Replace The Door Gasket On My Pellet Stove?
There are two gaskets on the door of a pellet stove; there is the glass gasket and the door gasket. You may be wondering if this is something you should plan on replacing and how often should it be replaced? The reality is this is not a gasket that needs to be replaced regularly. The […]
How to Modify a Fan to Fit the Austroflamm Wega
If you have an Austroflamm Wega and the convection fan has gone bad you have probably figured out you can’t get a new fan. In this video I show how to modify a fan to fit. You can buy this fan and the speed control by clicking the title below… Austroflamm Wega Fan Kit Austroflamm […]
Pellet Stove Pro Warehouse Tour
The video says it all. This is where all your parts come from. I have a system that I’ve built up over the years that gets your parts delivered fast and this is where they come from…
Oil for Pellet Stove Motors
What is the best oil to use on pellet stove motors? It seems reasonable that pellet stove motors need to be lubricated periodically. In my experience with pellet stove motors I have come up with another question; should you oil a pellet stove motor? Therefore I propose that it is not a matter of what […]
Lifespan of Pellet Stove Igniters
Pellet Stove Igniters are a tricky group of products. I say this because they are not all built the same and they can be unpredictable in how long they last with a few exceptions. The Pellet Stove Igniter used by Quadrafire pellet stoves fails the most frequently of any pellet stove igniter I know of. […]
Austroflamm Lower Cast Wall Gasket
The purpose of the lower cast wall gasket on the Austroflamm Integra is it creates an air seal. That seal forces air to go over the top of the upper cast wall which gives it maximum exposure to the heat exchange tubes. Without the lower cast wall gasket air can go around the side of […]
Why is the Fan Blade Different?
Things keep getting changed and upgraded in the Pellet Stove World. Motors and fan blades are one of the things that have been upgraded in the past few years. You may have noticed that the fan blade that came with your new motor looks different and may be smaller than what is on your old […]
Control Board Repair Updates (Austroflamm, Breckwell, Glo King)
At this time I do not have a way to provide active updates on your control board but here is what you can do; Enter the tracking number for you package on the website for the shipping carrier you used. From there you can see what day it was delivered. If it has been over […]
“My Auger Stopped”
When an auger motor fails it usually just quits but sometimes they can also get weak or slow. If so, replace it. Can you repair or rebuild and auger motor? I have had a lot of people try to repair an auger motor but I have not found anyone successful at it. The other issue […]